Siddament Tool Blue PETG V2 — 1.75mm 1kg
Siddament Tool Blue PETG V2 — 1.75mm 1kg
Siddament Tool Blue PETG on a 1.75mm, 1kg spool. Mixed to closely mimic the blue of common power tools, so battery mounts, wall holders and shop accessories match the kit they sit next to.
PETG sits between PLA and ABS. It prints nearly as easily as PLA but holds up far better to impact, moisture and chemicals — which is exactly what you want for workshop fixtures that get knocked around.
Specifications
| Material | PETG (Polyethylene Terephthalate Glycol) |
|---|---|
| Diameter | 1.75mm |
| Spool weight | 1kg net |
| Colour | Tool Blue — Pantone 322 C / #007577 |
| Density | 1.23 g/cm³ |
| Heat deflection temperature | 68°C |
Print settings
| Nozzle | 240–260°C |
|---|---|
| Bed | 70°C |
| Print speed | 50–200 mm/s |
| Part cooling | 50–100% |
| Nozzle diameter | 0.2–0.6mm |
| Layer height | 0.12–0.3mm |
| Drying | 50°C for 2–4 hours if damp |
Mechanical properties
| Tensile strength | 55 MPa |
|---|---|
| Elongation at break | 17.3% |
| Bending strength | 77 MPa |
| Flexural modulus | 2226 MPa |
| Notched impact strength | 17 kJ/m² |
| Water absorption (23°C / 24h) | <0.4% |
Figures from the Siddament PETG technical data sheet.
Sidd's notes
Inspired by, but not associated with, any power tool company. This blue is made to closely mimic the colour of your tools so you can print battery mounts and accessories that match.
Keep parts under 68°C in active applications — that's the heat deflection point.
Stocked in Perth
Held in stock in Bibra Lake, Western Australia and dispatched locally — no waiting on eastern-states freight.