Siddament Black PETG V2 — 1.75mm 1kg
Siddament Black PETG V2 — 1.75mm 1kg
Siddament Black PETG on a 1.75mm, 1kg spool. Pure jet black — the blackest the factory can produce, with no blue shades or reflections.
PETG sits between PLA and ABS. It prints nearly as easily as PLA but holds up far better to impact, moisture and chemicals, which makes it the sensible pick for functional parts, brackets, enclosures and anything that lives outdoors.
Specifications
| Material | PETG (Polyethylene Terephthalate Glycol) |
|---|---|
| Diameter | 1.75mm |
| Spool weight | 1kg net |
| Colour | Black — Pantone 6 C / #000000 |
| Density | 1.23 g/cm³ |
| Heat deflection temperature | 68°C |
Print settings
| Nozzle | 240–260°C |
|---|---|
| Bed | 70°C |
| Print speed | 50–200 mm/s |
| Part cooling | 50–100% |
| Nozzle diameter | 0.2–0.6mm |
| Layer height | 0.12–0.3mm |
| Drying | 50°C for 2–4 hours if damp |
Mechanical properties
| Tensile strength | 55 MPa |
|---|---|
| Elongation at break | 17.3% |
| Bending strength | 77 MPa |
| Flexural modulus | 2226 MPa |
| Notched impact strength | 17 kJ/m² |
| Water absorption (23°C / 24h) | <0.4% |
Figures from the Siddament PETG technical data sheet.
Sidd's notes
Consistently black across batches — no blue shades or reflections. It can read slightly blue on a screen, but the filament itself is completely black.
Keep parts under 68°C in active applications — that's the heat deflection point.
Stocked in Perth
Held in stock in Bibra Lake, Western Australia and dispatched locally — no waiting on eastern-states freight.